welding .

General Udon Thani topics only!
Post Reply
User avatar
martynsnowman
udonmap.com
Posts: 543
Joined: January 17, 2008, 9:32 am
Location: udon thani

welding .

Post by martynsnowman » March 14, 2012, 9:38 am

does any 1 know a welding shop where i can get an outside gate made up only about a meter square , nothing fancy just to stop the dog getting out . thanks for any help .



User avatar
maaka
udonmap.com
Posts: 3106
Joined: October 9, 2007, 6:03 am

welding .

Post by maaka » March 14, 2012, 9:55 am

sirsuk road, between the rear of the prison and the school, left hand side heading toward the airport..small shop, usually dudes welding up gates out on the pavement.

User avatar
Asiaphile
udonmap.com
Posts: 487
Joined: August 9, 2008, 4:35 pm

welding .

Post by Asiaphile » March 14, 2012, 7:48 pm

Some time ago I was looking for a welder too, but wasn't lucky in getting any recommendations through UM.
Of the ones that I did find through other channels, I found the "falang surcharge" to be rather high. High to such an extent that I decided not to have the work done.
Then one of my GF's acquaintances who was visiting recommended Edison to us. He an honest, hard-working guy, and, what's more, the price he quoted for the work was less than half of the price of the highest offer we initially got from another guy!
He speaks nit-noy English but to avoid any misunderstandings it's better to leave the talking to your Thai partner, if any. His telephone number is 082157029.

User avatar
jackspratt
udonmap.com
Posts: 12847
Joined: July 2, 2006, 5:29 pm

welding .

Post by jackspratt » March 14, 2012, 8:16 pm

Asiaphile wrote:Some time ago I was looking for a welder too, but wasn't lucky in getting any recommendations through UM.
Can you link to where you asked on UM?

User avatar
Asiaphile
udonmap.com
Posts: 487
Joined: August 9, 2008, 4:35 pm

welding .

Post by Asiaphile » March 14, 2012, 9:03 pm

jackspratt wrote:Can you link to where you asked on UM?
Sure! Why not?
http://www.udonmap.com/udonthaniforum/s ... 22511.html
But might I inquire as to your curiosity in this matter?

User avatar
jackspratt
udonmap.com
Posts: 12847
Joined: July 2, 2006, 5:29 pm

welding .

Post by jackspratt » March 14, 2012, 10:39 pm

Sure ...... I also had an interest in a welders, and couldn't remember seeing anything recent on UM about it.

User avatar
Asiaphile
udonmap.com
Posts: 487
Joined: August 9, 2008, 4:35 pm

welding .

Post by Asiaphile » March 14, 2012, 10:42 pm

Well, you've got one now :)

colt1911
udonmap.com
Posts: 248
Joined: September 3, 2010, 8:27 pm

Re: welding .

Post by colt1911 » July 18, 2021, 10:42 am

Good morning Forum Members. I am looking for a shop that can weld cast Iron. The process would be stop drill the crack, and weld, grind both sides of the crack smooth. The crack is an inch long cast iron is .250 inch thick.
Regards

dunroaming
udonmap.com
Posts: 1780
Joined: July 14, 2009, 1:34 pm

Re: welding .

Post by dunroaming » July 19, 2021, 11:10 am

colt1911 wrote:
July 18, 2021, 10:42 am
Good morning Forum Members. I am looking for a shop that can weld cast Iron. The process would be stop drill the crack, and weld, grind both sides of the crack smooth. The crack is an inch long cast iron is .250 inch thick.
Regards
There is a guy on the road out of Udon to Khon Kean who could probably do it, he's actually a real welder with certs who worked overseas for years. He has 2 shops one for stainless and one for other metals he's located before the driving license place on the same side. Usually he has many gates and security steel in front of the shop and the other shop I've seen huge platforms being built worth a run out and asking sorry don't have his number as away at the moment but he does speak good English and knows his stuff

colt1911
udonmap.com
Posts: 248
Joined: September 3, 2010, 8:27 pm

Re: welding .

Post by colt1911 » July 19, 2021, 11:40 am

Thank you Dunroaming. I'll give this man a visit. Sounds promising. I'll post his services here.
Best Regards,
Colt

User avatar
Niggly
udonmap.com
Posts: 3028
Joined: December 5, 2018, 5:51 pm
Location: Living in Doug’s Flop House Head rent free. It’s nice, lots of empty space

Re: welding .

Post by Niggly » July 19, 2021, 9:53 pm

Do you mean these units on the northbound side heading towards Udon? There’s usually huge gantries outside although there doesn’t seem to be many the day the Google Map car drove past (& a bigass truck obscuring the street view🙄)

Image

Image
Coordinator for Tesco Lotus Boxing Events, fun times, eh

dunroaming
udonmap.com
Posts: 1780
Joined: July 14, 2009, 1:34 pm

Re: welding .

Post by dunroaming » July 19, 2021, 11:16 pm

Niggly - yes looks like it he did my gate and security steel made a good job and actually told staff to fix things without being asked. He worked in Singapore on Exxon jobs and is fully coded. I have no complaints at all and wasn't crazy prices he also did doors in the small man cave at the back of the house.

User avatar
Niggly
udonmap.com
Posts: 3028
Joined: December 5, 2018, 5:51 pm
Location: Living in Doug’s Flop House Head rent free. It’s nice, lots of empty space

Re: welding .

Post by Niggly » July 20, 2021, 10:07 am

Aah, okay.
If it helps the OP, this place is quite a way before the DLT, it’s before you go through Non Sung.

GPS is around (17.3101613, 102.8521093) & there’s a phone number on street view
Image

There’s actually quite a large black & green sign roadside now advertising their services although it’s all in Thai
Coordinator for Tesco Lotus Boxing Events, fun times, eh

dunroaming
udonmap.com
Posts: 1780
Joined: July 14, 2009, 1:34 pm

Re: welding .

Post by dunroaming » July 20, 2021, 11:23 am

Niggly wrote:
July 20, 2021, 10:07 am
Aah, okay.
If it helps the OP, this place is quite a way before the DLT, it’s before you go through Non Sung.

GPS is around (17.3101613, 102.8521093) & there’s a phone number on street view
Image

There’s actually quite a large black & green sign roadside now advertising their services although it’s all in Thai
Thanks niggly every little helps and couldn't remember exactly where the shop was

Post Reply

Return to “General Udon Thani Forum”