Sand Blasting.

General Udon Thani topics only!
Post Reply
User avatar
Wee Jimmy
udonmap.com
Posts: 612
Joined: August 31, 2010, 11:49 am

Sand Blasting.

Post by Wee Jimmy » April 9, 2021, 10:07 am

Anyone know where l can get bit of sand blasting done.

Thanks.



User avatar
parrot
udonmap.com
Posts: 9738
Joined: March 19, 2006, 8:32 pm

Re: Sand Blasting.

Post by parrot » April 9, 2021, 1:35 pm

The facebook page mentions sand blasting

https://www.facebook.com/%E0%B8%A3%E0%B ... 984675106/

pal52
udonmap.com
Posts: 1080
Joined: September 18, 2013, 10:54 am

Re: Sand Blasting.

Post by pal52 » April 9, 2021, 1:40 pm

Depends how big the item is.
I had a friend who had a Pipe Coating and blasting business in Pattaya.
He told me years ago sand blasting is illegal in Thailand due to the Silica dust it creates.
He had to use shot blasting in his chambers.

User avatar
Wee Jimmy
udonmap.com
Posts: 612
Joined: August 31, 2010, 11:49 am

Re: Sand Blasting.

Post by Wee Jimmy » April 9, 2021, 2:08 pm

The item is a set of legs from a singer sewing machine which I want to clean up in order to make a table.
I note what you have said and will try wire brushing and emery paper.

Thanks.

dunroaming
udonmap.com
Posts: 1689
Joined: July 14, 2009, 1:34 pm

Re: Sand Blasting.

Post by dunroaming » April 9, 2021, 5:16 pm

Jimmy just prep and paint with hammerite will look great, you can order hammerite online from homepro and they deliver it or they also have the us version rustoleum.

User avatar
tamada
udonmap.com
Posts: 9330
Joined: February 21, 2007, 4:03 am
Location: down two... then left

Re: Sand Blasting.

Post by tamada » April 21, 2021, 1:24 pm

I noticed there's a shop offering powder coating on the Kutchap road, south side about half-way between the ring road and Hansa, just before the yellow temple walls.

User avatar
Wee Jimmy
udonmap.com
Posts: 612
Joined: August 31, 2010, 11:49 am

Re: Sand Blasting.

Post by Wee Jimmy » April 21, 2021, 1:50 pm

Thank l will remember that Steve.
I've rubbed it down an sprayed it. Looks good so all l have to is get a top for it.

User avatar
tamada
udonmap.com
Posts: 9330
Joined: February 21, 2007, 4:03 am
Location: down two... then left

Re: Sand Blasting.

Post by tamada » April 21, 2021, 2:33 pm

Wee Jimmy wrote:
April 21, 2021, 1:50 pm
Thank l will remember that Steve.
I've rubbed it down an sprayed it. Looks good so all l have to is get a top for it.
https://www.google.co.th/maps/@17.40676 ... 3?hl=en-GB
powder coating shop.jpg

User avatar
Niggly
udonmap.com
Posts: 2252
Joined: December 5, 2018, 5:51 pm
Location: Watching old movie clips in Nong Na Kham

Re: Sand Blasting.

Post by Niggly » April 30, 2021, 7:57 pm

Took a dish drainer that had started rusting on the joints to this place for powder coating.
Really pleased with the results, gave him some more bits to do after inspection
Home Cable TV’s new Archive Officer

User avatar
tamada
udonmap.com
Posts: 9330
Joined: February 21, 2007, 4:03 am
Location: down two... then left

Re: Sand Blasting.

Post by tamada » May 1, 2021, 7:12 am

Niggly wrote:
April 30, 2021, 7:57 pm
Took a dish drainer that had started rusting on the joints to this place for powder coating.
Really pleased with the results, gave him some more bits to do after inspection
Thanks for that satisfied customer report. I am planning getting the rims on my sports lorry done there.

User avatar
saint
udonmap.com
Posts: 3450
Joined: February 28, 2008, 5:31 pm
Location: the truth is out there . but dont dare tell it !!!!

Re: Sand Blasting.

Post by saint » May 1, 2021, 1:32 pm

If you carry on the same road past Hansa , by the canal on the left is a parade of shops . The last one does wheel renovation , including straightening buckled wheels . Not expensive , and ive been very happy with the results . Ive used him a few times .

User avatar
Drunk Monkey
udonmap.com
Posts: 6643
Joined: October 14, 2013, 4:39 pm

Re: Sand Blasting.

Post by Drunk Monkey » May 1, 2021, 7:35 pm

saint wrote:
May 1, 2021, 1:32 pm
If you carry on the same road past Hansa , by the canal on the left is a parade of shops . The last one does wheel renovation , including straightening buckled wheels . Not expensive , and ive been very happy with the results . Ive used him a few times .
Agree i used this place for gouges and kerb rash on alloys ..excellent service and not expensive.

DM
Claret n Blue all way thru .. Up the Iron
L2 Season 19/20 Codheads 0 Scunny 1 https://www.youtube.com/watch?v=i2qrsItFUug
8 minutes is the point of lift off !!!!!!!

User avatar
papafarang
udonmap.com
Posts: 3366
Joined: August 2, 2013, 10:14 am

Re: Sand Blasting.

Post by papafarang » May 1, 2021, 9:02 pm

My second pie press could do with a restoration, it was made sometime in the early 1950's. Its coated in hammerite paint but no etching primer used ,the surface is so hard that paint just chips off .
Hansa village clubhouse . Tel 0981657001 https://www.google.co.th/maps/place/Han ... 5851?hl=en

dunroaming
udonmap.com
Posts: 1689
Joined: July 14, 2009, 1:34 pm

Re: Sand Blasting.

Post by dunroaming » May 1, 2021, 9:50 pm

papafarang wrote:
May 1, 2021, 9:02 pm
My second pie press could do with a restoration, it was made sometime in the early 1950's. Its coated in hammerite paint but no etching primer used ,the surface is so hard that paint just chips off .

Save money on restoration which to making Rowies only trays required

User avatar
tamada
udonmap.com
Posts: 9330
Joined: February 21, 2007, 4:03 am
Location: down two... then left

Re: Sand Blasting.

Post by tamada » May 2, 2021, 4:44 pm

saint wrote:
May 1, 2021, 1:32 pm
If you carry on the same road past Hansa , by the canal on the left is a parade of shops . The last one does wheel renovation , including straightening buckled wheels . Not expensive , and ive been very happy with the results . Ive used him a few times .
Good tip, thanks saint. I have a couple that have clipped the rough as guts and variable height kerbstones here so I could get them refurbished before the powder coating.

User avatar
Niggly
udonmap.com
Posts: 2252
Joined: December 5, 2018, 5:51 pm
Location: Watching old movie clips in Nong Na Kham

Re: Sand Blasting.

Post by Niggly » May 7, 2021, 7:54 pm

tamada wrote:
May 1, 2021, 7:12 am
Niggly wrote:
April 30, 2021, 7:57 pm
Took a dish drainer that had started rusting on the joints to this place for powder coating.
Really pleased with the results, gave him some more bits to do after inspection
Thanks for that satisfied customer report. I am planning getting the rims on my sports lorry done there.
I had this fella powder coat another rusty piece for me & was happy again with the result.
I’ve now commissioned him to make me a shoe rack/bench from scratch.
Collect next week.
Home Cable TV’s new Archive Officer

Post Reply

Return to “General Udon Thani Forum”