3/4" / 19 mm hose

Post Reply
User avatar
tamada
udonmap.com
Posts: 13422
Joined: February 21, 2007, 4:03 am
Location: Down two...then left

3/4" / 19 mm hose

Post by tamada » February 4, 2022, 12:10 pm

Looking for a meter of fuel-grade hose for my oil catch can installation. I can get it on lazada but pretty sure it can be had down Udon's own motor alley. Anyone know of a dead cert shop rather than me going door to door?
.
H25pv hose.jpg
Ta
tam


You don't have to be afraid of everything you don't understand.

User avatar
parrot
udonmap.com
Posts: 10583
Joined: March 19, 2006, 8:32 pm

Re: 3/4" / 19 mm hose

Post by parrot » February 4, 2022, 12:26 pm

Can't say for sure, but as you're heading toward Makro from the fountain circle, on your left hand side probably not more than 75m from the circle, there are 2 shops that sell a variety of things like this. I believe the owner of the first shop speaks English (might be the second shop). In any case, show him what you're looking for.....I'll bet he has it.

User avatar
sometimewoodworker
udonmap.com
Posts: 3042
Joined: October 7, 2008, 11:19 am

Re: 3/4" / 19 mm hose

Post by sometimewoodworker » February 4, 2022, 1:24 pm

If that doesn’t work then try ToolPro it’s likely that they will have it.
Jerome and Nui's new househttp://bit.ly/NJnewHouse

Whistler
udonmap.com
Posts: 2662
Joined: June 15, 2019, 8:24 pm

Re: 3/4" / 19 mm hose

Post by Whistler » February 4, 2022, 3:47 pm

Toolpro would be my first option
All wagers will be settled 80 days after the race is over

User avatar
noosard
udonmap.com
Posts: 3266
Joined: April 17, 2011, 4:07 am
Location: Ban Jumpa Udon
Contact:

Re: 3/4" / 19 mm hose

Post by noosard » February 4, 2022, 5:17 pm

parrot wrote:
February 4, 2022, 12:26 pm
Can't say for sure, but as you're heading toward Makro from the fountain circle, on your left hand side probably not more than 75m from the circle, there are 2 shops that sell a variety of things like this. I believe the owner of the first shop speaks English (might be the second shop). In any case, show him what you're looking for.....I'll bet he has it.
I agree with you
Those shops seem to have every accessory in them

User avatar
stattointhailand
udonmap.com
Posts: 17025
Joined: October 25, 2007, 11:34 pm
Location: Oiling the locks on my gun case

Re: 3/4" / 19 mm hose

Post by stattointhailand » February 4, 2022, 6:16 pm



Sorry couldn't resist

pepesgrill
udonmap.com
Posts: 1240
Joined: April 21, 2020, 8:37 pm

Re: 3/4" / 19 mm hose

Post by pepesgrill » February 4, 2022, 6:52 pm

did you buy some kind of kit that's missing a bit
of hose? even that looks to be a serious headache
i briefly watched a mishimoto install :-& barf

heater core hose is commonly 5/8 and 3/4 i think
sae j20 that high pressure oil/ fuel line j30r6 gets increasingly unflexible. doesnt look like fun at all

pepesgrill
udonmap.com
Posts: 1240
Joined: April 21, 2020, 8:37 pm

Re: 3/4" / 19 mm hose

Post by pepesgrill » February 4, 2022, 7:26 pm

this isn't a new problem ( unexplained oil loss) or
simple piston ring wear blamed as culprit. i think
there's slightly more to it than that

the supposed remedy even ( catch cans around for decades) installed inline with the pcv system

i started reading about it as it pertained to 350z
with people saying they had to add a quart every
1,000-1,500 miles. well, thats just not right :-s

Post Reply

Return to “I'm Looking For....”